Description:

This is basic 40 pin AVR development board with DIP(Dual in-line package) socket. If you are starting with AVR microcontroller than this board is perfect for programming AVR microcontroller as well as for designing and testing AVR based projects.The board has onboard ATmega32 MCU(32K Flash Memory).The board is compatible with the ATmega16,ATmega32 and 40 Pin AVR microcontrollers.
Board has on board power supply circuit,RS232 port for serial communication with computer and other serial device(GPS modules, GSM Modems,RFID Reader),power status LED(RED),Reset switch, User switch, User LED(GREEN), and port extensions for all 4 ports. ISP (in-circuit programming) header port for Loading HEX file.
You can power the Borad through the  DC plug-in jack jack. The on-board power regulator can handle anything from 8 to 15VDC/VAC. 

Features:

• On-board bridge rectifier enables the board to accept both AC and DC Input voltages

• Recommended Input Voltage: 9-12V

• Min-Max Input Voltage: 8-15V

• 5 mm standard DC plug-in jack for Input supply

• On-board 5V regulator (LM7805) circuit.

• On-Board power supply on-off switch

• Power Status LED(RED)

• User LED(GREEN) connected to P2.0 through jumper JP3

• User Switch connected to P3.7 through jumper JP2

• On-board 16 MHz crystal

• Port extensions for all ports with detailed pin labelling for easy identification of pins

• External pull-up resistors for Port 0

• On-board MAX232 interface circuit for easy communication with a computer and other serial devices (GPS modules, GSM Modems, etc)

• On-board ISP connector for loading HEX file.

• 12V, 5V and GND bus provided for external peripheral.

• High quality FR-4(1.6 mm) PCB

• Four 3mm mounting hole for easy mounting 

Documents:

• Circuit diagram

Package Includes:

• AVR Development Board DIP Socket

• ATmega32 Microcontroller on-board

• MAX232 on-board