Description: The Atmel®AVR® ATmega8 is a low-power CMOS 8-bit microcontroller based on the AVR RISC
architecture. By executing powerful instructions ..
Description: This is a preprogrammed Atmega328P-PU chip, useful if you want to make your own Arduino-compatible or repair a damaged chip on an exisiting Arduino UNO.pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded proje..
Description: The Atmel®AVR® ATmega8 is a low-power CMOS 8-bit microcontroller based on the AVR RISC
architecture. By executing powerful instructions in a single clock cycle, the ATmega8 achieves
throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption
vers..
Description:The Atmel®AVR® ATmega8A is a low-power CMOS 8-bit microcontroller based on the AVR RISC
architecture. By executing powerful instructions in a single clock cycle, the ATmega8A achieves throughput's approaching 1MIPS per MHz, allowing the system designer to optimize power consum..
Microchip's SST89E516RD is a 8051 based Microcontroller. It is pin to pin and code to code 100% equivalent to NXP's P89V51RD2. The main advantage of using SST89E516 is it has a inbuilt bootloader and it can be serially programmed through PC using EASY IAP Software.The IC is supported in Keil C51 as ..