8051 Quick starter development board
  • Rs720.00
  • Ex Tax: Rs720.00
  • quantity
    Availability: 42

    Silicon TechnoLabs

Tags: 8051, microcontroller, 16x2 LCD, DS1307, RTC

8051 Quick starter development board

SKU : DEV-00044


The 8051 Quick stater development board is suitable for programming 8051 microcontroller(Required external ISP programmer for AT89S52) from Atmel as well as for designing and testing 8051 projects. This board contains on board device such as alphanumeric 16x2 LCD display,DS1307 RTC, port expander,power supply circuit,RS232 port for serial communication,power status LED(RED),Reset switch, User switch, User LED(GREEN),etc,that conveniently interface with 8051 microcontroller and allow you to easily simulate the operation of target device.The board is compatible with the AT89S51/52 and the P89V51RD2 microcontrollers. The P89V51RD2 allows serial programming and can be programmed directly with this board through a serial connection without an external programmer.


  • On-board bridge rectifier enables the board to accept both AC and DC Input voltages
  • Recommended Input Voltage: 9-12V
  • Min-Max Input Voltage: 9-18V
  • 5 mm standard DC plug-in jack for power supply
  • On-board 5V regulator (LM7805) circuit.
  • On-Board power supply on-off switch
  • On-board 16x2 LCD display contrast adjustment
  • On-board alphanumeric 16x2 LCD display
  • On-board DS1307 RTC
  • 8 LEDs to indicate pins logic state
  • RS-232 communication connector.
  • Power Status LED(RED)
  • User LED(GREEN) connected to P2.0 through jumper JP3.
  • User Switch connected to P3.7 through jumper JP2.
  • On-board 11.0592 MHz crystal
  • Port extensions for all ports with detailed pin labelling for easy identification of pins
  • External pull-up resistors for Port 0
  • On-board MAX232 interface circuit for easy communication with a computer and other serial devices (GPS modules, GSM Modems, etc)
  • On-board ISP connector for loading HEX file into AT89S51/52.
  • 12V, 5V and GND bus provided for external peripheral.
  • High quality FR-4(1.6 mm) PCB
  • Four 3mm mounting hole for easy mounting 


Package Includes:

  • 8051 Quick starter development board
  • Alphanumeric 16x2 LCD display
  • DS1307 RTC
  • 3V coin battery
  • AT89S52 Microcontroller on board
  • MAX232 on board

Related Products

Write a review

Please login or register to review
Send Me Message on Facebook